Product finder
Oil & GasWeir is committed to delivering market-leading products and services that meet the technical and commercial challenges of onshore and offshore facilities, refineries and chemical plants.
Weir valves are designed and manufactured to deliver high performance and reliability in general and severe service duties whist our pumps are designed for erosive duty and durability ·
We are leaders in the repair and refurbishing of large or critical rotating and stationary equipment, both in-shop and on-site. For example: pumps, fans & blowers, compressors and heat exchangers. Our engineering team can propose upgrades that includes specific coatings, to increase or improve performance.
A regular or full bore ball valve. Suitable for isolation and cryogenic applications in the power, oil and gas and petrochemical industries.
A regular or full bore three piece ball valve. Suitable for isolation applications in the power, oil and gas and petrochemical industries.
A regular or full bore one piece ball valve. Suitable for isolation applications in the power, oil and gas and petrochemical industries.
A regular or full bore trunnion mounted ball valve for burried application. Suitable for isolation applications in the power, oil and gas and petrochemical industries.
A regular or full bore Two piece ball valve. Suitable for isolation applications in the power, oil and gas and petrochemical industries
BDK 3-piece, trunnion mounted, ball valve suitable for isolation applications in the power, oil & gad and petrochemical industries
A regular or full bore trunnion mounted ball valve. Suitable for isolation applications in the power, oil and gas and petrochemical industries.
BDK Eccentric Butterfly valve for regulation and control in water treatment, desalination, power, steel, chemical and process plants.
BDK Double Eccentric Butterfly valve for regulation and control in water treatment, desalination, power, steel, chemical and process plants.
Metalseal Double Offset High Performance valve,meets requirements of ANSI Class IV leakage.
Tricentric® butterfly valves for Hardened Containment Vent Systems (HCVS) in Nuclear Applications.
Weir Valve incorportates a rubber seal clamped to the vane edge to ensure 360 degrees seal contact in the closed position
PERFECT FOR CRYOGENIC OR HIGH TEMPERATURE SERVICE. THEY RESIST WEAR AND ARE SUITABLE FOR AGGRESSIVE MEDIA. VALVES ARE AVAILABLE IN SIZES 75 TO 2440 mm(3"TO 96") IN ASME PRESSURE CLASS 150 TO 600
TRICENTRIC VALVES ARE PERFECT APPLICATIONS IN NUCLEAR POWER PLANTS THEY RESIST WEAR PROVIDE LONG SERVICE LIVES AND ARE COST EFFECTIVE
Valve developed using PTFE for all wetted parts, for both Control & isolation of aggressive media
Weir Firesafe certifed Double Offset High Performance Valve,available Class 150 -900
Weir Entry Double Offset High Performance Valve,available Class 150- 900
Weir Valve was developed as a high quality rubber lined valve for use on seawater/brine applications,Body made in DI or CS.
BDK Rubber Lined Butterfly valves for regulation and control in water treatment, desalination, power, steel, chemical and process plants.
Standard Changeover Valves
Low Pressure Loss Changeover Valves
Standard Forged Changeover Valves
A valve used for control of high pressure well fluids. The Blakeborough range of Choke Valves are designed to handle pressure drops of up to 500bar.
A buttefly valve that is suitable for many process applications where a complete tight shut-off is not essential.
The BV831 series valve is used for proportional control on flow splitting applications by diverting a portion of the process medium from one part of the system to another.
Small Globe Control Valve for a Wide Variety of Process Applications
The BV990 / 992 are ahigh pressure cage trim series of control valves are designed to meet the requirements of most process control applications.
The BV802 / 803 single seated valve offers high rangeability, tight shut-off capability. The top and bottom guided valves are suited to a wide range of general process applications.
The BV800 / 801 double seated valve offers high capacity on low to medium pressure drop applications. The top and bottom guided valves are suited to a wide range of general process applications.
The BV830 valve is designed for proportional blending of two flows into one stream or as a mixing valve to control the composition of service media. It can also be used for flow splitting duties.
The BV500 cage trim series of control valves are designed to meet the requirements of most process control applications.
Pipe desuperheater that is suitable for steam conditioning applications for pipe sizes 6" and above.
A mini desuperheater that is suitable for steam conditioning applications for pipe sizes up to 6".
A fixed orifice pipe desuperheater which is suitable for applications where separate spray control is required.
A combined pressure reducing & desuperheating valve to control high pressures & temperatures associated with steam power generation.
Cast iron gate, globe and sluice valves, suitable for isolation, or regulation and control, in the water treatment, power, steel, chemical and processing industries.
Hopkinsons Full Bore & Venturi Gate Valves
ATWOOD & MORRILL™ - Wye Globe Valves
A knife-edge gate valve, suitable for isolation for pulp, fibrous, paper pulp, slurries and sludge applications.
ATWOOD & MORRILL™ - Main Steam Isolation Valves
Hopkinsons - High Performance Drain valves
General purpose isolation stop valves, Steam/Fluid isolation achieved by the screwdown action of the Valvehead to the Seat Straight and Angle Pattern Design
ATWOOD & MORRILL™ - Three Way Globe Valves
A forged steel valve, suitable for isolation applications in the power, oil and gas and petrochemical industries.
A globe valve, suitable for chlorine service in the power, oil and gas and petrochemical industries.
Atwood & Morrill™ - Parallel Slide Gate Valves
Cast and forged steel, gate and globe valves, suitable for cryogenic and isolation applications in the power, oil and gas and petrochemical industries.
Hopkinsons - Wedge Gate valves
Safety Valves, Globe Stop Valves, Feed Check Valves, Blowdown Valves, Water Gauges
Cast steel gate and globe valves, suitable for isolation applications in the power, oil and gas and petrochemical industries.
Low-Flow, High Pressure, Single-Stage Pitot Tube Pump
High pressure single stage centrifugal pump with advanced pitot tube technology.
High Pressure Single-Stage, Centrifugal Pump With Advanced Pitot Tube Technology
High Pressure Variable Speed Roto-Jet
ATWOOD & MORRILL™ FREE FLOW™Reverse Current Valve. An Extraction Steam Non Return Valve - The Standard in Steam Turbine Protection
Feed water pump check valve - a rugged valve available with or without a side assist closing air cylinder. Wide flat seats assure long life and tight shut off.
A self regulated lift check valve, with a specifically engineered design to provide protection against an extreme event.
Designed to allow verification of operability for critical check valves.
A cast steel swing check valve, suitable for isolation applications in the power, oil and gas and petrochemical industries.
Pipeline Isolation Valves for a Wide Range of Process Applications
HP Turbine Exhaust Non Return Valve - The Standard in Steam Turbine Protection
A forged steel lift check valve, suitable for isolation applications in the power, oil and gas and petrochemical industries.
Uni-directional / non return check valve, suitable for the power, oil and gas and petrochemical industries.
The WEMCO Non-Clog pump design is an improved, modern design over conventional non-clog pumps in the market place.
The WEMCO engine-driven trailer or skid mounted packages with WEMCO Non-Clog pumps provide extensive application flexibility.
Weir precision measurement technology: Alignments, levelling, bore verification, flatness, parallelism, surface deformation.
Align maintenance philosophy to your business targets Weir Power & Industrial has a vast history of being pioneers in industrial Asset Management (AM). Extensive experience is gained in ...
Weir precision measurement technology
Whether it's a complete overhaul or a crisis repair, MRC will commit its factory authorized technicians, machinists, welders, and engineers to solving your crushing problems, in this regard our...
Weir Power & Industrial specializes in re-engineering and extending the life-span of pumps, turbines and other critical rotating equipment. We are a leader in the repair and refurbishing...
Weir’s global parts solution is a system of custom manufacturing replacement, or, obsolete parts without the need for expensive tooling. Combining proven technologies with computer aided...
Reverse engineering involves producing 3-D images of manufactured parts when a blueprint is not available in order to remanufacture the part. To reverse engineer a part, the part is measured by a...
Piloted Safety Valves for pressurizer, Safety valves for Residual Heat removal System, Safety valves for Chemical and Volume Control System for process protection
Main Steam Safety Valves & Industrial applications for process protection
Medium operated Isolation and Relief medium operated & Main Steam Isolation Valves for process protection
ASME/API Spring Loaded Safety Relief Valves (Balanced Bellows - Full nozzle - Flanged)
ASME/API Spring Loaded Safety Valves (Conventional - Full nozzle - Flanged)
ASME/API Spring Loaded Safety Relief Valves (Portable - Conventional or Balanced - Full nozzle)
Spring Loaded Safety Relief Valves (Conventional - Semi nozzle - Flanged)
Sarasin-RSBD - ASME/API Pilot Operated Safety Relief Valves (Portable - Full nozzle)
A unique range of pressure relief valves for steam boiler protection. Designed for use in power plants and industrial applications such as petrochemical, sugar, pulp and paper plants.
ASME/API Pilot Operated Safety Relief Valves (Full nozzle)
ASME/API Pilot Operated Safety Relief Valves (Semi nozzle)
ASME/API Pilot Operated Safety Valves (Full nozzle - Steam Design)
ASME Spring Loaded Safety Valves (Semi nozzle - 3% steam overpressure design)
Heat Exchange Institute Design
Sarasin RSBD Starflow Spring Loaded Safety Relief Valve - Conventional Type P3. Designed for safety, high performance and simplicity.
Severe service control valve with X-Stream™ trim for control of high pressure, cavitation and high noise.
MEG Dosage Rotary Gate Valve
Tank Blanketing System
Our dedicated engineering team support and deliver solutions to the client as well as train clients employee's on a range of rotating equipment needs. Brand: Weir
Turbomachinery engineering specializes in the manufacture of spare parts, field overhaul and workshop repair of steam turbines. Workshop repairs are carried out at our specialist facilities. Our...
Weir can Manufacture direct replacement for any of the above Hopkinsons/Autotork electric actuators including the Nuclear Qualifield (NQ) range.
Find your local service centre »